Operation
33
Advanced operation
Setting further durations
You have placed the food in the oven,
selecte
d a temperature and a duration.
You can set the programme to switch
off or on and off automatic
ally by
setting Ready at or Start at.
– Ready at
You specify the time you want
cooking t
o stop.
– Start at
You specify the time you want
cooking t
o start.
Cooking results can be impaired if
there
is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change its colour and even
deteriorate.
If the temperature in the oven is too
high,
e.g. just after another
programme, you will not be able to
use this function. Ready at / Start at will
not appear in the display if this is the
case. Open the oven door until the
appliance has cooled down.
Switching on and off automatically
To switch a cooking programme on and
off automati
cally you have a choice of
how to enter the time parameters:
– Duration and Ready at
– Duration and Start at
Example: it is 11:45. The food takes
5 minute
s to cook and should be ready
at 12:30.
Set a time of 00:05 in the Duration
field.
Set a time of 12:30 in the Ready at
field.
Confirm with OK.
Start at is calculat
ed automatically. The
cooking duration entered is added to
the heating-up time calculated by the
steam oven.
Start at 12:18 appears in the display.
The
cooking process will start
automatically at this time.
To Next Page
Loading...
Need help?
General
