Operation
34
Sequence of an automatic
progr
amme
Up until the start time the function,
the select
ed temperature, cooking
duration (time left), Start at and the start
time will appear in the display.
After the programme has started you
can follow the heating-up phase in the
display until the r
equir
ed temperature
has been reached.
Once this temperature is reached a
buzzer will soun
d, if this option has
been switched on (see "Settings -
Volume - Buzzer tones").
After the heating-up phase you can
follow the time counting down in the
display
. The last minute counts down in
seconds.
At the end of the programme a b
u
zzer
will sound, if this option has been
switched on (see "Settings - Volume -
Buzzer tones").
The steam generator and lighting will
switch off. Steam reduction (only with a
t
emperature above approx. 80 °C) and
Process finished will appear in the
display.
You have the option of saving your
settings
as a User programme (see
"User programmes") or increasing the
cooking duration via Change. Touch
twice to go to the main menu.
Changing settings during a
progr
amme
Select Change.
The following will appear in the display:
– Temperature
– Duration
– Ready at
– Start at
If the temperature in the oven is too
high Ready at and Start at ar
e not
displayed.
– Open further settings
Changing the temperature
Change the temperature.
Confirm with OK.
The programme will restart with the
new temper
ature.
You can permanently reset the
recomme
nded temperature to suit
your personal cooking preferences.
(See "Settings - Recommended
temperatures").
Changing the cooking duration
Change the duration.
Confirm with OK.
The programme will restart with the
new duration.
To Next Page
Loading...
Need help?
General
