Description of functions
25
Heating-up phase
During the heating-up phase the
display will show the temper
ature in the
cooking compartment as it rises and
Heat-up phase in all programmes except
for Automatic programmes, Menu cooking
and Descale.
The duration of the heating-up phase
will depend on the quantity and the
t
emperature of the food. In general the
heating-up phase will last for approx. 5
minutes. The duration will be longer if
you are cooking refrigerated or frozen
food.
Cooking phase
The cooking phase begins when the set
temper
ature is reached. During the
cooking phase, the duration remaining
will be shown in the display.
Steam reduction
The appliance door will open a fraction
just before the end of a cooki
ng
programme to release some of the
steam from the cabinet. Steam reduction
will appear in the display. The door will
then close automatically.
Steam reduction can be switched off if
you wish (see "Settings - St
eam
reduction"). If switched off there will be
a lot of steam emitted from the cabinet
when the door is opened.
Oven interior lighting
For energy saving reasons, the oven
compartment li
ghting has been set at
the factory to go out after the
programme has begun.
If you want it to stay on all the time the
oven is on you will need t
o alter the
default setting (see "Settings -
Lighting").
If the door is left open at the end of a
cooking pr
ogramme the oven lighting
will switch off automatically after
5 minutes.
The lighting can be switched on for
15 seconds
by pressing the button
on the control panel.
To Next Page
Loading...
