Automatic programmes
39
To use an Automatic
progr
amme
Select Automatic programmes .
A list of food types will appear in the
display.
Select the food category.
The Automatic programmes available
for the food type select
ed will then
appear
.
Select the Automatic programme that
you want.
Each step you need to take before
starting
the Automatic programme will
appear in the display.
In some programmes you will be
pr
ompt
ed on when to add food to the
oven. Follow and confirm these
instructions.
Notes on using these programmes
– The degree of doneness and
browning
levels are shown in a bar
graph with seven segments. The
factory default is always the middle
setting. It will be highlighted. To
change the setting simply move the
highlighting to the left or the right.
– The weight entry in the Automatic
progr
ammes refers to the weight per
piece. For example, you can cook
just one piece of salmon weighing
250 g or 10 pieces of salmon
weighing 250 g at the same time.
– The oven interior needs to be at room
temper
ature before starting an
Automatic programme.
– When placing food in an already hot
steam ove
n, be very careful when
opening the door. Hot steam can
escape. Step back from the steam
oven and wait until the steam has
dissipated. When putting cooking
containers or the condensate tray
into the oven or taking them out, take
care not to spill the contents. Avoid
contact with hot steam, and do not
touch the hot oven interior walls.
Danger of burning and scalding.
– To end an automatic programme
early,
you need to switch the steam
oven off completely by touching .
Cancel cooking? will appear in the
display
. I
f Yes is selected, the main
menu will be shown in the display.
– If by the end of an Automatic
pr
ogr
amme the food is not cooked
enough, select Continue cooking.
– Automatic programmes can also be
saved as User programmes.
To Next Page
Loading...
Need help?
General
