Building-in dimensions
170
Installation in a base unit
The furniture housing unit must not have a back panel fitted behind the
building-in niche.
When building the appliance into a base unit underneath a hob please also
obser
ve the installation instructions for the hob as well as the building-in depth
required for the hob (see installation instruction manual for the hob).
a
Steam oven
b
Niche
c
Inlet for mains connection cable to the appliance
d
Recommended position for electrical socket. Important: Do not position behind
the appliance.
e
Mains connection cable
* Glass front / ** metal front
To Next Page
Loading...
Need help?
General
