Description of functions
24
Moisture
The Combi mode and Reheat functions
use a combination of oven heat and
moistur
e. You can alter the moisture
level within a given range for an
individual cooking programme or a
cooking stage.
Depending on the moisture setting for
the programme, either moisture or fresh
air is injected into the oven. If the
moisture level is set to 0 %, the
maximum amount of air will be injected
and no moisture. If the moisture level is
set to 100 %, air will not be injected
into the oven and the maximum amount
of moisture will be injected.
Some food gives off moisture during
the coo
king process. This moisture
from the food also controls the amount
of moisture needed. If the required
amount of moisture is very low and the
food already contains a lot of water the
steam generator may not be activated
at all.
Duration
Depending on the function, you can set
a cook
ing duration of between 1 minute
and 6, 10 or 12 hours.
The duration of the Automatic,
Maintenance and Menu cooking
programmes is set at the factory and
cannot be altered.
With the Steam cooking
function and
programmes that use steam alone, the
cooking duration does not start to
count down until the set temperature
has been reached. It begins
immediately with all other functions and
programmes.
Noises
You will hear a pumping sound when
the appliance is switched on, during
use and aft
er switching it off. This is the
sound of water being pumped through
the system and is quite normal.
When the steam oven is in use, you will
hear a fan noise.
To Next Page
Loading...
Need help?
General
