Operation: Functions without steam
48
Advanced operation
You have placed the food in the oven,
select
ed a function and set the
temperature or grill level.
Select Change.
Further options will appear in the
display which you can select or change
for your pr
ogramme:
– Duration
– Ready at
A Duration and Ready at time cannot be
en
tered if you are using the food
probe. When using the food probe,
the end of the cooking duration is
determined by when the set core
temperature is reached.
– Start at
Only appears when either Duration
or
Ready at have been set or if you are
using the food probe.
– Heating-up phase
Only appears if you have set a
t
emperature of more than 100 °C in
Fan plus and Conventional heat.
– Change function
Setting further durations
By entering Duration, Ready at or Start at
you can aut
omatically switch the
cooking programme off or on and off.
– Duration
Enter the cooking duration required.
Y
ou can select a duration of between
1 minute and 12 hours, or 1 minute
6 hours for grill functions.
– Ready at
You specify the time you want
cooki
ng to stop.
– Start at
You specify the time you want
cooki
ng to start.
When baking, the oven should not
be set t
o start a long time off.
Otherwise the cake mixture or dough
will dry out, and the raising agents
will lose their effectiveness.
Cooking results can be impaired if
ther
e is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.