EasyManuals Logo

Miele DGC 7860 User Manual

Miele DGC 7860
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #189 background imageLoading...
Page #189 background image
Installation
*INSTALLATION*
189
Electrical connection
Risk of injury due to electric
shock.
During installation, maintenance, and
repair work, the steam oven must be
disconnected from the electricity
supply:
To disconnect the steam oven, fully
unscrew the breakers, trip the
ground fault circuit interrupter, or un-
plug the power cord from the socket.
To do this, pull the plug, not the
power cord.
Risk of injury.
Installation, repairs, and other work
by unqualified persons could be dan-
gerous. Miele cannot be held liable
for unauthorized work.
Installation, maintenance, and repairs
must only be carried out by a techni-
cian authorized by Miele.
The connection data (frequency and
voltage) on the steam oven’s data
plate must correspond with those of
the electricity supply in order to en-
sure that no damage can occur to
the steam oven.
Compare this data before connecting
the appliance. If in any doubt, con-
sult a qualified service technician.
For safety reasons, the steam oven
may only be used after it has been
built in.
Important –Save these instructions
for the local electrical inspector’s use.
Connection
Make sure that the connection data
on the data plate (voltage, frequency,
and fuse rating) matches that of your
electricity supply.
The data plate is located on the top of
the housing.
Connection data
The steam oven is equipped with a
783/4” (2.0m) power cord with plug for
connection to an electricity supply with:
208/240V/20A/60Hz
Ensure that the socket is easily accessi-
ble after the steam oven has been in-
stalled.
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not
synchronized with the grid power
supply (e.g., island networks, back-up
systems) is possible. A prerequisite for
operation is that the power supply sys-
tem complies with national and local
codes.
The function and operation of the
protective measures provided in the
domestic electrical installation and in
this Miele product must also be main-
tained in isolated operation or in opera-
tion that is not synchronized with the
grid power supply, or these measures
must be replaced by equivalent mea-
sures in the installation.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele DGC 7860 and is the answer not in the manual?

Miele DGC 7860 Specifications

General IconGeneral
Oven sizeMedium
Oven typeElectric
Top heatingYes
Number of ovens1
Total oven power- W
Microwave cookingNo
Oven thermostat range30 - 225 °C
Number of shelf positions4
Total oven(s) interior capacity68 L
Clock typeElectronic
Timer typeDigital
Connected load3500 W
AC input voltage230 V
AC input frequency50 - 60 Hz
Energy efficiency class-
Energy consumption (conventional)- kWh
Door hingedown
Cord length2 m
Control typeTouch
Door materialGlass
Product colorGray
Control positionFront
Housing materialStainless steel
Appliance placementBuilt-in
Weight and Dimensions IconWeight and Dimensions
Depth567 mm
Height596 mm
Weight46000 g
Installation compartment depth555 mm
Installation compartment width568 mm
Installation compartment height595 mm
Installation compartment width (min)560 mm
Installation compartment height (min)590 mm

Related product manuals