Operation
67
Cleaning the steam oven
Remove the water container and con-
densate container and empty them as
required.
Turn the steam oven off.
Appliance rinsing appears after a cooking
program involving steam.
Follow the instructions on the display.
The rinsing process should be car-
ried out every time to flush any re-
maining food deposits out of the sys-
tem.
Clean and dry the whole steam oven
as described in “Cleaning and care
for the steam oven”.
Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
cooking program, a tone will sound and
the display will prompt you to refill the
container with fresh water.
Remove the water container and fill it
with fresh water.
Push the water container into the ap-
pliance.
The cooking program will continue.
Changing values and settings
for a cooking program
Depending on the operating mode, as
soon as a cooking program is in
progress, you can change the values or
settings for this program.
Depending on the operating mode, you
can change the following settings:
- Temperature
- Moisture
- Duration
- Booster
- Preheat
- Crisp function
Changing the temperature and core
temperature
Via Settings| Recommended tempera-
tures, you can permanently adjust the
recommended temperature to suit
your cooking preferences.
The core temperature only ap-
pears if you are using the probe (see
“Roasting – Probe”).
Tap the temperature display.
Change the temperature and the
core temperature as required.
Confirm with OK.
The cooking program will resume with
the new target temperatures.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
