Using the appliance
19
Selecting an operating mode
Turn the operating mode selector to
the required operating mode.
The recommended temperature will
appear in the display.
Change the recommended
temperature with the rotary
selector, if necessary.
Confirm with OK.
Changing the operating mode
You can change to another operating
mode during a cooking process.
Turn the operating mode selector to
the new operating mode.
Any cooking durations set will be
deleted.
Entering numbers
Numbers that can be changed are
highlighted.
Turn the rotary selector
clockwise or anti-clockwise to
change the number.
Confirm with OK.
The changed number is now saved.
Selecting a menu option from a
list
When, and are selected,
the relevant menu appears.
Using the rotary selector, scroll
through the list until the menu option
you want appears.
Confirm with OK.
Changing a setting in a list
A tick will appear beside the current
setting.
Turn the rotary selector
clockwise or anti-clockwise until the
required value or setting is shown.
Confirm with OK.
The setting is now saved. This will take
you back to the previous menu.
Changing the setting with a
segment bar
Some settings are represented by a bar
with seven segments. If all
of the segments are illuminated, the
maximum value is selected.
If none of the segments are illuminated,
or only one of them is, the minimum
value is selected or the setting is
switched off altogether (e.g. volume).
Turn the rotary selector
clockwise or anti-clockwise until the
required setting is shown.
Confirm your selection with OK.
The setting is now saved. This will take
you back to the previous menu.