Operation
42
Easy to use
Place the food in the oven.
Select the required oven operating
mode with the operating mode
selector.
The operating mode is displayed briefly
and then the recommended
temperature will appear.
Change the recommended
temperature with the rotary
selector, if necessary.
The recommended temperature will be
accepted within a few seconds. You
can change the temperature
subsequently via the rotary
selector.
Confirm with OK.
The actual temperature will appear and
the heating-up phase will commence.
You will see the temperature increasing.
A buzzer will sound when the set
temperature is reached for the first time.
When the cooking process is
finished, turn the operating mode
selector to0.
Take the food out of the oven
compartment.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
- Temperature
- Duration
- Finish at
- Start at
Changing the temperature
You can permanently reset the
recommended temperature to suit
your cooking preferences by selecting
the| Recommended temps. sensor
control.
Change the temperature using the
rotary selector.
The temperature changes in 5°C steps.
Confirm with OK.
Tip: If you have programmed a cooking
duration, you first have to quit the
“Cooking duration” menu by touching
the sensor control. You can then
change the temperature using the rotary
selector.
Then touch the sensor control to
display the cooking duration again.