MIMAKI JV5 Series Maintenance Manual

© 2009 MIMAKI ENGINEERING CO.,LTD.
5.1.35 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Test Items > Test Function > PINCH ROLLER
Model CJV30/TPC Issued 2008.08.04 Revised F/W ver. 1.00 Remark
1.0
Rev.
5.1.35 PINCH ROLLER
 Purpose
To check the changeover operation of the clamping pressure
 Operation sequence of PINCH ROLLER test
No. Item Description Remarks
1 Test start [ENTER]:Starting the PINCH ROLLER test
2 Selecting the clamping
pressure and the order of
changeover
Example of panel display: L>0>L>M>L>H
[], []: Selects the order of clamping pressure changeover.
[], []: Selects the clamping pressure (Applied to all the pinch rollers)
Set value: H, M, L, O
3 Selecting the number of
pinch roller until which
the clamping pressure is
changed over.
Example of panel display: PINCH ROLLER No.7
4 Start of test operation [ENTER]: Starts operation.
5 Test end [END]: Test is completed.

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English