3-3
3.4 Hardware Specifications
Physical
Size 261 × 240 × 171mm (width×height×depth)
Weight < 5 kg (With no accessory and battery)
Display
Type Color TFT LCD
Size 8.4 inches (diagonal)
Resolution 800×600 pixels
Recorder
Type Thermal dot array
Horizontal resolution 160 dots/cm (at 25 mm/s recording rate)
Vertical resolution 80 dots/cm
Width of the recorder paper 50 mm
Length of the recorder paper 20 m
Recording rate 25 mm/s, 50 mm/s
Recorded waveforms 3
LED indicator
Alarm indicator 1 (yellow and red)
AC power indicator 1 (green)
Battery indicator 1 (green)
Audio indicator
Speaker
Giving audio alarms (45 to 85 dB), keypad tones, and
heartbeat/pulse tone.
Supporting PITCH TONE and multi-level volume.
Audio alarms comply with EN 60601-1-8 and IEC60601-1-8.
Connectors
Power supply 1 AC power connector
Parameter ECG, RESP, TEMP, SpO2, NIBP, IBP, CO2
Network 1 standard RJ45 network connector, 100 BASE-TX
VGA 1 standard color VGA monitor connector, 15-PIN D-sub
Auxiliary output 1 BNC connector
Equipotentiality 1 equipotential grounding connector
To Next Page
Loading...
Need help?
General
