Care and Cleaning of the Monitor Preventative Maintenance
6 - 4 0070-10-0705 Passport V™ Service Manual
6.3 Care and Cleaning of the Monitor
The monitor enclosure may be cleaned with a mild soap and water solution or ammoniated
window cleaner. Apply cleaning solution to the cloth, not directly onto the monitor. DO NOT
apply large amount of liquid. DO NOT use abrasive cleaning agents or organic solvents.
WARNING: Do not clean the monitor while it is powered on and/or
plugged in.
To prevent scratches on the screen, carefully brush dust and dirt particles with a soft sponge
moistened with cleaning solution or a fine, soft-hair brush. DO NOT use abrasive cleaning
materials. Remove fingerprints and stains with a liquid lens cleaner and a soft cloth. DO
NOT wipe a dry screen or use alcohol or solvents containing chlorinated hydrocarbon.
6.3.1 Decontamination of the Monitor
WARNING: Perform the decontamination process with the unit powered
off and the power cord removed.
Decontamination of a unit that has come in contact with a biological material can be
performed using LpH SE Germicidal detergent. Apply a small amount of detergent to a
disposable wipe (paper based) and wipe down the outside of the unit. Discard the wipe
appropriately. After waiting 10 minutes, use a clean dry wipe to dry the unit.
CAUTION: When cleaning the monitor, do not allow cleaning solutions
into the vent openings.
To Next Page
Loading...
Need help?
General
