Disassembly Instructions Repair Information
3 - 18 0070-10-0705 Passport V™ Service Manual
3.5.20 Removal of the Fan Assembly
1. Remove the main frame and multi-parameter board assembly as stated in “Removal of
the Main Frame and Multi-parameter Board Assembly” on page 3-16.
2. Cut the clamp that secures the fan cable.
3. Disconnect the fan cable from the interface board.
FIGURE 3-31 Disconnect the fan cable from the interface board
4. Remove the fan EVA cushion.
5. Remove the two screws that secure the fan.
FIGURE 3-32 Remove the fan assembly
6. Remove the fan.