Remote control buttons and functions (cont.)
@ select buttons
Use these buttons to select the component you wish to operate:
the TV, an audio component (in the CABLE layer), VCR-A or
VCR-B. These are also used to set up :your remote control for
your particular brand of VCR.
audio and VCR buttons
These buttons can be used to control VCRs, cassette deck_% CD
players, etc. These are pre-programmed to operate select
Mitsubishi components. As for the PLAY button, see "Us.ing the
Active A/V Network Feature," page 91.
power button (POWER)
Use to turn the TV on or off.
@mute control (MUTE)
Use to turn the sound off completely o1"restore it to its o_Lginal
volume.
_)super quick view button (SQV)
Press to view channels you have programmed into the super
quick view memory.
_)quick view button (QV)
Press to switch to the channel you have stored into the quick
view memory.
@volume control (VOLUME)
Press the top part of the button to turn up the volume; press
the bottom part of the button to turn down the volume.
@input button (INPUT)
Use to select the input source you wish to watch:
• Antenna A,
• Antenna B, or
• External 1, 2 or 3.
@ channel control (CHANNEL)
Press the top part of the button to change to a channel with a
higher number; press the bottom part to change to a channel
with a lower number.
@enter button (ENTER)
May be used after selecting a channel number or an item from
the on-screen menu system. Also use with the PIP fi_nction.
@ audio and video controls
These buttons are used in pairs to adjust features of the image
or sound (other than volume) with a two-step process: using
one of the audio or video buttons to select a function, and then
using the adjust up/down button or right/left button.
audio function button (AUDIO)---Use to select one of the
following audio functions:
-stereo!SAP/mono,
-bass,
22 Chapter 1 : Getting to Know Your TV
To Next Page
Loading...
Need help?
General
