Memorizing channels
_Important:
Your TV automatically memorizes the channels you can receive.
Once channels are memorized, you can scan through them using
the channel control on the remote control and control panel.
To memorize channels: O
First Time Set-Up
Set the clock
• Memorize channels
Add/delete channels
Set AN Network
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
TV Main Menu.
Memorize channels
On which input would you
like to memorize '_
• Ant-A
Ant-S
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
First Time Set-Up Menu.
Memorize channels
What is connected to
your TV on Ant-A?
• Cable antenna
Indoor/outdoor antenna
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
First Time Set-Up Menu.
Memorize channels
Now memorizing all the
stations you can receive
on Ant-A.
Channel 004
Not in memory
Please stand-by.
To cancel memorization,
press CANCEL.
O
O
O
O
O
Press the MENU button on the
remote control. The TV Main
Menu 'will appear on the screen.
Select "First Time Set-Up" using
the ADJLTST button; then press
the ENTER button.
Select "Memorize channels"
using the ADJUST button; then
press the ENTER button.
The instructions for memorizing
channels will appear.
Choose either Antenna A (Ant-A)
or Antenna B (Ant-B) to memo-
rize charmels; then press the
ENTER button. Choose which-
ever input you connected your
antemm or cable to. If you
connected an antenna to each
input, then you should memorize
the channels for the one input
now, and for the other input
later.
Use the ADJUST button to
choose tile type of antenna you
connected: Cable antenna or
Indoor/outdoor antenna. Then
press the ENTER button.
You will see a message that
states that channel memoriza-
tion is in progress. Memorized
channels will read "In memory";
channels not in memory say "Not
in memory.' You may stop
channel memorization at any
time by pressing the CANCEL
button.
The channel controls (CHANNEl,) will work only after channels
have been programmed into memory. After memorizing, u,_e the
channel controls (CHANNEL) on the control panel or on the remote
control to change channels. Use the number buttons to select
individual channels.
60 Chapter 3: Operating Your TV
To Next Page
Loading...
Need help?
General
