• Basic Connections
This section explains the basic connections you will need to make
between your TV, antennas, and VCR. You will see there are
different connections shown depending upon whether you have a
decoder box and the type of antenna you are _asing. Choose the
type of connection for the equipment you have.
This section explains:
TV+external speakers,
TV+antenna or cable without a decoder box,
TV+antenna or cable with a decoder box,
TV+separate UHF and VHF antennas,
TV+VCR+antenna or cable without a decoder box,
TV+VCR+antenna or cable with a decoder box,
TV+home theater receiver (A/V receiver),
TV+audio system, and
TV+Mitsubishi products that have A/V Network termi-
nals.
DImportant: You must connect a VCR to see two active images when using
Picture-In-Picture (PIP).
28 Chapter 2: Connecting Your TV
To Next Page
Loading...
Need help?
General
