Preparing Your Radio for Use
English
13
Installing the Flexible Antenna
With your radio turned off, set the antenna in its receptacle and
turn clockwise to attach it to your radio.
Note: The tightening torque allowable is 15 lb-ft (maximum)
to avoid damage to the antenna and radio.
To remove the antenna, turn the antenna counterclockwise.
Make sure you turn off your radio first.
• Do not twist or coil the antenna because this
will result in antenna performance degradation.
See pictures below.
Not recommended
Acceptable
APX_3000_M1.book Page 13 Thursday, November 7, 2013 4:48 PM
To Next Page
Loading...
Need help?
General
