General Radio Operation
English
32
Receiving and Responding to a Radio Call
Once you have selected the required channel and/or zone, you
can proceed to receive and respond to calls.
The Transmitting or Receiving LED lights up solid red when
your radio is transmitting. In conventional mode, this LED lights
up solid yellow when your radio is receiving a transmission. In
trunking mode, there is no LED indication when your radio
receives a transmission.
If your radio is receiving a secure transmission, this LED blinks
yellow.
Receiving and Responding to a Call‡
Procedure:
When you receive a call, depending on how your radio is
preprogrammed:
1 ASTRO Conventional Only:
The LED lights up solid yellow.
OR
Trunking Only:
The display shows the caller alias or ID.
2 Press the PTT button to respond to the call. The LED lights
up solid red.
3 Release the PTT button to listen.
See Making a Radio Call† on page 34 for details on making a
Talkgroup Call.
Transmit/
Receive LED
Bluetooth
LED
APX_3000_M1.book Page 32 Thursday, November 7, 2013 4:48 PM
To Next Page
Loading...
Need help?
General
