Advanced Features
English
58
attempts to pair with your radio. This only occurs when
the previously-connected accessory has become
disconnected, whether or not the Bluetooth Drop Timer
has expired.
Indicating the Bluetooth Connection is Lost
Your radio shows a when the devices have a Bluetooth
connection. Below is the scenario and radio indications when
the connection is interrupted.
Procedure:
1 The blue LED blinks rapid blue for two seconds. The
Bluetooth icon starts blinking for 10 seconds. Your radio
sounds an decremental-pitched tone and the display shows
<Device Type> alternates with CON LOST.
2 If the Bluetooth device successfully re-connects before the
Bluetooth Drop Timer expires, Blue LED light solid blue for
two seconds. Your radio display shows momentary <Device
Type> CONNCTED, and
a shows persistently.
OR
If the Bluetooth device fails to re-connect within 10 seconds,
blue LED blinks rapidly for two second and the blinking
a is
replaced by a persistent b.
Pairing with Standard Pairing Feature
Note: Bluetooth tones and preprogrammed buttons must be
preprogrammed by a qualified radio technician. Check
with your dealer or system administrator for more
information.
Once a COTS headset is paired to your radio, it is
always connected. Therefore the battery life of the
accessory is aligned with the Talk time power
consumption, not the Standby time consumption.
The Bluetooth Standard Pairing feature enables your Bluetooth
enabled radio to search for other Bluetooth enabled and
discoverable device. Once the device is discovered, your radio
automatically pairs with the device.
This feature also enables your Bluetooth enabled radio to be
visible to another Bluetooth enabled device and receive request
to pair from other device.
APX_3000_M1.book Page 58 Thursday, November 7, 2013 4:48 PM
To Next Page
Loading...
Need help?
General
