Using the Wearable Terminal 2 - 15
Selecting Checkboxes and Radio Buttons
To select or deselect checkboxes and radio buttons press the TAB key until the field is highlighted. Press ALT -
BKSP (SPACE) to select or deselect the checkbox or radio button.
Figure 2-11
Selecting a Checkbox or Radio Button
Selecting Items in a List
Use a combination of key sequences to select items in a folder or list.
To select continuous items in a folder or list:
1. Open the folder or list.
2. Use the scroll keys to move to the first item to select.
3. Press SHIFT - scroll key (either up or down) to select the next item.
4. Repeat the SHIFT - scroll key combination to select remaining items.
5. Perform the desired function.
To select multiple items in a folder or list:
1. Open the folder or list.
2. Use the scroll keys to move to the first item.
3. Press CTRL - scroll key to move within the list. The item name is outlined.
4. Repeat step 3 to move to the desired item.
5. Press SPACE to highlight the item.
6. Repeat steps 3 through 5 until all items are selected.
7. Perform the desired function.
Screen Calibration
To calibrate the touch screen so the cursor on the touch screen aligns with screen taps:
1. Press Start > Settings > Control Panel > Stylus icon > Calibration tab > Recalibrate button.
2. Carefully press and briefly hold on the center of the Calibration screen target. Repeat the procedure as the
target moves and stops at different locations on the screen. This enters the new calibration settings.
Highlighted Checkbox
Radio Buttons
NOTE Not available on the Voice Only and non-touch configurations.
To Next Page
Loading...
Need help?
General