© National Instruments Corporation A-1 E Series User Manual
A
Device-Specific Information
This appendix includes device- and family-specific information about the
following E Series device families:
• NI 6011E (NI PCI-MIO-16XE-50)
•
NI 6013/6014 Family
• NI 6015/6016 Family
• NI 6020E Family
• NI 6023E/6024E/6025E Family
• NI 6030E/6031E/6032E/6033E Family
• NI 6034E/6035E/6036E Family
• NI 6040E Family
• NI 6052E Family
• NI DAQCard-6062E
• NI 6070E/6071E Family
Note To obtain documentation for devices not listed here, refer to ni.com/manuals.
NI 6011E (NI PCI-MIO-16XE-50)
The NI 6011E (NI PCI-MIO-16XE-50) is a Plug-and-Play, multifunction
analog I/O, DIO, and TIO device for PCI bus computers. The
PCI-MIO-16XE-50 features the following:
• 16 AI channels (eight differential) with 16-bit resolution
• Two AO channels with 12-bit resolution
• Eight lines of TTL-compatible DIO
• Two 24-bit counter/timers for TIO
• A 68-pin I/O connector
Because the PCI-MIO-16XE-50 has no DIP switches, jumpers, or
potentiometers, you can easily configure and calibrate it through software.
To Next Page
Loading...
Need help?
General
