To Next Page

To Previous Page

English-59

English

Using the “SET/POINT ZOOM” button on the remote control enlarges part of the screen image.

Press the CH+/- button to zoom in or out. The image can be expanded up to 10 times.

1 Press the [SET/POINT ZOOM] button on the remote control. The icon looks like a magniﬁer.

2 Move the magniﬁer icon with the [ ] [ ] [+] [-] buttons.

3 Press the [CH+] to zoom in. Press [CH-] to zoom out.

4 Press the [SET/POINT ZOOM] to let the icon disappear.

5 Press the [EXIT] to return to the normal image size.

6 Press the [MENU] to open the OSD menu.

NOTE: • When using this function, the image may look distorted.

• Thisfunctionis not available when set to IMAGE FLIP (except for NONE), MULTI PICTURE MODE, SCREEN

SAVER, SUPER in INPUT CHANGE, TILE MATRIX and TEXT TICKER.

• WhenDYNAMIC or ZOOM is selected in ASPECT, the image will change to FULL. Then start with POINT ZOOM.

After exiting POINT ZOOM, ASPECT will return to the previous ASPECT settings. When ASPECT is changed

during the POINT ZOOM operation, DYNAMIC and ZOOM will be set to FULL image.

• Themagniericondoesnotmovetoanoimagearea.

• POINT ZOOM returns to the normal image size after changing the input signal or when the monitor is powered off.

• POINTZOOMwill become inactive when changing the ASPECT setting during the POINT ZOOM operation.

• When the POINT ZOOM is active, the STILL function is not available.

• POINTZOOMisnotavailablewhen MODE2 in HDMI in TERMINAL MODE and with a 3840 x 2160 (60 Hz)

DisplayPort signal.

POINT ZOOM

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync V984Q and is the answer not in the manual?

NEC MultiSync V984Q Specifications

General

Response time	8 ms
Display diagonal	98 \
Display brightness	350 cd/m²
Display technology	LED
Vertical scan range	24 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
LED backlighting type	Direct-LED
Contrast ratio (typical)	1300:1
Display number of colors	1.073 billion colors
Display diagonal (metric)	247.82 cm
Active display area (W x H)	2158.9 x 1214.4 mm
Supported graphics resolutions	1920 x 1080 (HD 1080), 1920 x 2160, 3840 x 2160, 4096 x 2160
Orientation	Horizontal/Vertical
Product design	Digital signage flat panel
Placement supported	Indoor
Bezel width (bottom)	15.9 mm
Panel mounting interface	400 x 400, 600 x 400 mm
USB version	2.0
USB ports quantity	5
DisplayPorts quantity	3
Compatible memory cards	MicroSD (TransFlash), MicroSDHC
Ethernet LAN data rates	100 Mbit/s
VGA (D-Sub) input ports	0
Ethernet LAN (RJ-45) ports	2
Purpose	Universal
Operating hours (hours/days)	24/7
International Protection (IP) code	IP5X
Power consumption (standby)	0.5 W
Power consumption (typical)	380 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	CE; EAC; EMC B; FCC; SASO; TÜV GS; UL/C-UL, CSA; VCCI
RMS rated power	20 W
Harmonized System (HS) code	85285210