3 General description PowerRouter • Solar Inverter • Installation manual
16
EN
3 General description
3.1 The PowerRouter - intended use
The PowerRouter is a DC to AC solar inverter, designed for indoor use. It is designed for use with solar
panels and connection to the grid. In case of a grid failure, the AC local out may supply backup power to
the connected load. For more information visit www.PowerRouter.com.
The PowerRouter is compliant with the following standards:
• 2004/108/EC (EMI)
• 2006/95/EC (low voltage directive)
The PowerRouter has no servicable parts inside.
3.1.1 Internet connection
When the PowerRouter is connected to the internet the myPowerRouter.com web portal provides detailed
system information (for example performance, profit) of your PowerRouter. The PowerRouter can even be
remotely updated with new firmware containing the latest features, so the system is always kept up to
date.
3.1.2 PowerRouter software installation tool
The software installation tool helps you to initialize the PowerRouter, make advanced setting, and update
the PowerRouter firmware if applicable.
Before you can use the software installation tool, you must install the software on your computer. You can
download the software installation tool from the website: www.PowerRouter.com. The software installation
tool includes the latest available firmware version, so no additional downloads are required.
You can download the PowerRouter software installation tool, driver, and guideline via the PowerRouter
website. You need your login details for this website. You can request login details via
www.PowerRouter.com. Check the website regularly for updates to the PowerRouter software installation
tool.
3.2 1-phase sensor (accessory PRA1SENSE)
With the signal from the 1-phase sensor, the PowerRouter determines the energy consumption from the
public grid on one phase. With the 1-phase sensor the consumption of self generated solar energy is
maximized. The 1-phase sensor can be ordered via your local Business Partner.