To safely de-install the PowerRouter, you must follow the instructions in this chapter.
8.1 De-install
To de-install the PowerRouter:
1. Switch the PowerRouter unit OFF.
2. Switch the solar disconnect switch OFF (on the bottom of the PowerRouter).
3. Switch the AC switches OFF (grid and local out).
4. Wait at least 5 minutes, to ensure the unit is completely de-energised.
5. Disconnect the communication wires.
6. Disconnect any optional connections.
7. Disconnect the solar panel string wiring with the special tool (figure 6).
8. Disconnect the AC wires.
9. Disconnect the DC wires.
10. The PowerRouter can now be removed for disposal or repair.
The wires from the solar panels are always energised. The voltage from a string of solar panels can
be as high as 600 V. The current can be as high as 15 A.
De-installation must be carried out by qualified personnel. Contact your installer/dealer.
8.2 Disposal
When the PowerRouter reached the end of its service life, or is defect beyond repair:
• Dispose of the PowerRouter according to local regulations.
• Submit the PowerRouter to a collection point for electrical and electronic waste recycling.
To Next Page
Loading...
Need help?
General
