Use VLANS for Traffic Segmentation
35
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
Enable the Voice VLAN for Ports
By default, the voice VLAN is disabled for all ports.
To enable the voice VLAN for one or more ports:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 6.
The login window opens.
4. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
5. Select VLAN > Voice VLAN > Port Settings.
6. Select the check boxes for one or more ports.
To select all ports, select the check box in the table heading.
7. In the Voice VLAN Mode menu, select Enable.
8. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
Need help?
General
