Configuring Networks
Viewing Network Activation Information
You can check whether network access is activated.
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click About in the top right corner of the page.
3. Check the Activation Date in the WWAN Info section. This is the date that the
hotspot was activated on the Sprint network.
Viewing Data Usage
You can view an estimate of your data usage on your device’s home and Data Usage screens,
and on the Zing Manager’s home page.
Note: The data usage shown is an estimate only and is not accurate for billing purposes.
Note: The session data counter resets automatically each time your device is powered off and
on, and when the mobile broadband network connection disconnects and reconnects
(for example, when going through a tunnel). The billing plan data counter resets
automatically when the next billing cycle starts.
On the Touchscreen
The data usage shown on the home screen is for the current billing cycle.
To see detailed data usage:
1. On the home screen, tap the data usage bar.
2. On the Data Usage screen, tap Billing Cycle or Session.
The Billing Cycle screen displays:
● Amount of data remaining and used in the current billing cycle.
● Number of days remaining in the current billing cycle.
● Number of days remaining in the current billing cycle.
● Date that the next billing cycle begins.
The Session screen displays:
● Amount of data used in the current session.
Configuring Networks 101
To Next Page
Loading...
Need help?
General
