Router > Port Forwarding Tab
Port forwarding lets you forward incoming traffic to specific ports and devices (per their local IP
address) on your network. (Normally, incoming traffic is blocked.)
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click Settings > Router > Port Forwarding.
You can:
● Enable or disable port forwarding. See Enabling Port Forwarding.
Note: You must enable port forwarding before you can view and update the port forwarding
list.
● Enter port forwarding details for an application. (See Enabling Port Forwarding for an
Application.)
For example, you can configure port forwarding so that:
You can access your Remote Desktop from the Internet (by specifying the WAN
[public] IP address that your device is using).
Zing Manager (Browser) Interface 83
To Next Page
Loading...
Need help?
General
