2. Determine the COM port number that your NETGEAR device (that is, your
NETGEAR Zing Mobile Hotspot) is using.
In the following example for Windows, the Device Manager shows that COM 16 is
used. In your case, the COM port number might be different.
3. (If you don't know how to access the Device Manager, see
http://kb.netgear.com/app/answers/detail/a_id/22868.)
4. Configure your GPS application to use the same COM port. For help, see the
documentation of the GPS application.
Questions About WPS
Find answers to common questions about WPS.
What is WPS?
Wi-Fi Protected Setup (WPS) provides a fast, simple, and secure way to connect WPS-enabled
devices to your Wi-Fi network. You don’t have to give the name (SSID) and Wi-Fi password of
your network to other users.
The WPS feature is available on certain cameras, printers, smartphones, and laptops. These
devices have either a hardware button or a WPS-related option in the software. Please consult
the user documentation of your device.
How do I Use WPS?
Please see Connecting Through WPS.
If a Wireless Device has a WPS Button or a WPS Software
Option, Must I Use it to Connect Via Wi-Fi?
If this is the only way your device provides to connect through Wi-Fi, then you must use the
WPS button or the WPS software option. Some laptops support two methods — a WPS button
or software option, and Wi-Fi network manager software where you can connect by entering the
Wi-Fi network name (SSID) and password, as described in How Do I Connect to Wi-Fi?.
Please consult the user documentation of your device.
Frequently Asked Questions 128
To Next Page
Loading...
Need help?
General
