2--1
SECTION 2
CONTROLS, INSTRUMENTS AND OPERATION
INTRODUCTION
This Operator’s Manual has been produced to
provide the user with practical information,
documents and instructions about the correct
procedure for running in, driving, operating and
maintaining the new tractor .
The Manual is subdivided into 10 sections. The main
index is at the end of the Manual (Section 10).
Read and refer to this Manual carefully, and always
keep it in a convenient place so that you can refer to
it whenever necessary.
If you should at any time need information and advice
about using your tractor, please contact your
authorised dealer .
The dealer can provide skilled personnel, genuine
spare parts and the necessary equipment to carry
out your service requirements.
All the data provided in this Manual is subject to
product modifications. Weights and measures are to
be considered approximate figures and the
illustrations do not necessarily show tractors with
standard fittings.
For precise information on specific tractor models
and versions, please contact your authorised dealer .
The Company is engaged in a continuous process of
product development and improvement and
therefore reserves the right to change the
specifications, components and prices of the product
itself at any time, without prior notice.
In this Manual, the ”left--hand” and ”right--hand” parts
of the tractor are as seen from the driver’s seat,
facing forward.
The necessary precautions to guarantee the
personal safety of the operator and others are listed
and described under the heading ‘WORKING
SAFELY’ at the beginning of the Manual. Read and
follow the information provided BEFORE using the
tractor.
To Next Page
Loading...
Need help?
General
