SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--19
CAB
TRE0013A
39
This section of the Manual deals only with the use of the heated and ventilated cab.
ATTENTION
The cab is an integral part of the Structure of the Tractor .
The cab structure must in no way be modified
It is therefore prohibited to drill, weld or anyhow connect any device to it that would impair its intended operation.
Any damage due to accident, fire, theft or corrosion to the original structure could make it inefficient and lessen
its safety.
It is therefore necessary for specialized personnel to evaluate the damage and, if necessary, have the damaged
parts replaced.
All the internal parts, such as the operator’s seat, including any seat belts, must be carefully checked and must
show no sign of any damage whatsoever.
-- The cab must be replaced in the event of overturning.
-- All the internal parts, such as the operator’s seat, including any seat belts, must be carefully checked and
must show no sign of any damage whatsoever .
-- All damaged parts must be replaced.
IN THE EVENT OF OVERTURNING, DO NOT ATTEMPT TO REPAIR, WELD OR STRAIGHTEN THE CAB,
contact your Dealer’s specialized personnel instead
To Next Page
Loading...
Need help?
General
