Nice MC424L User Manual

2 – ENGLISH
ENGLISH
Translation of the original instructions in full
CONTENTS
GENERAL SAFETY WARNINGS AND
PRECAUTIONS
1
1 GENERAL SAFETY WARNINGS AND PRECAUTIONS
a
Prior to installing the appliance, carefully read and
observe these instructions, since incorrect installa-
tion can cause serious harm to people and damage
to the appliance. Store them with care.
a
According to the latest European legislation, an
automated device must be constructed in conform-
ity to the harmonised rules specied in the current
Machinery Directive, which allow for declaring the
presumed conformity of the automation. Conse-
quently, all the operations for connecting the prod-
uct to the mains electricity, its commissioning and
maintenance must be carried out exclusively by a
qualied and expert technician.
a
In order to avoid any danger from inadvertent re-
setting of the thermal cut-off device, this appliance
must not be powered through an external switching
device, such as a timer, or connected to a supply
that is regularly powered or switched off by the cir-
cuit.
WARNING! Please abide by the following warnings:
– Before commencing the installation, check the “Prod-
uct technical specications”, in particular whether this
product is suitable for automating your guided part.
Should it not be suitable, do NOT proceed with the in-
stallation.
– The product cannot be used before it has been com-
missioned as specied in the “Testing and commis-
sioning” chapter.
– Before proceeding with the product’s installation,
check that all the materials are in good working order
and suited to the intended applications.
– The product is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
capacities, nor by anyone lacking sufcient experience
or familiarity with the product.
– Children must not play with the appliance.
– Do not allow children to play with the product’s control
devices. Keep the remote controls out of reach of chil-
dren.
– The system’s power supply network must include a dis-
connection device (not supplied) with a contact open-
ing gap permitting complete disconnection under the
conditions envisaged by Overvoltage Category III.
– During the installation process, handle the product with
care by avoiding crushing, impacts, falls or contact
with liquids of any kind. Do not place the product near
sources of heat nor expose it to open ames. All these
actions can damage the product and cause it to mal-
function, or lead to dangerous situations. Should this
occur, immediately suspend the installation process
and contact the Technical Assistance Service.
– The manufacturer declines all liability for damages to
property, objects or people resulting from failure to
observe the assembly instructions. In such cases, the
warranty for material defects shall not apply.
– The weighted sound pressure level of the emission A is
lower than 70 dB(A).
– Cleaning and maintenance reserved for the user must
not be carried out by unsupervised children.
– Before working on the system (maintenance, cleaning),
always disconnect the product from the mains power
supply.
1 GENERAL SAFETY WARNINGS AND PRECAUTIONS . . . . . 2
2 PRODUCT DESCRIPTION AND INTENDED USE. . . . . . . . . . 3
2.1 List of control unit parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1 Pre-installation checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2 Product usage limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.3 Product identification and overall dimensions . . . . . . . . . . . 4
3.4 Typical installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.5 Installing the control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 ELECTRICAL CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . 5
4.1 Preliminary checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.2 Wiring diagram and description of connections . . . . . . . . . 6
4.2.1 Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2.2 Description of connections . . . . . . . . . . . . . . . . . . . . . . . 7
4.2.3 Operations for connection . . . . . . . . . . . . . . . . . . . . . . . 7
4.2.4 Notes on connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.2.5 ALT (STOP) input type . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.3 Initial start-up and electrical connections test . . . . . . . . . . . 9
4.4 Motor selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.5 Automatic limit switch search and “STOP” input
acquisition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5 TESTING AND COMMISSIONING . . . . . . . . . . . . . . . . . . . . . 11
5.1 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.2 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6 PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.1 Using the programming buttons . . . . . . . . . . . . . . . . . . . . 11
6.2 Pre-set functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6.3 Level 1 programming (ON-OFF) . . . . . . . . . . . . . . . . . . . . 12
6.3.1 Level 1 programming procedure . . . . . . . . . . . . . . . . . 12
6.4 Level 2 programming (adjustable parameters) . . . . . . . . . 13
6.4.1 Level 2 programming procedure . . . . . . . . . . . . . . . . . 13
6.5 Memory deletion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.6 Memorising the transmitters . . . . . . . . . . . . . . . . . . . . . . . 15
6.6.1 Procedure for memorising transmitter buttons . . . . . . . 15
6.6.2 Number of transmitters that can be memorised . . . . . . 15
6.6.3 Transmitter memorisation and deletion procedures . . . 15
6.7 LOCKING AND UNLOCKING THE MEMORY . . . . . . . . . . 17
7 TROUBLESHOOTING... (troubleshooting guide) . . . . . . . . 17
7.1 Signalling through warning light . . . . . . . . . . . . . . . . . . . . 17
7.2 Signals on the control unit . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.3 Maintenance notification . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.4 Anomaly log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8 FURTHER INFORMATION (Accessories). . . . . . . . . . . . . . . 20
8.1 Connecting an SM-type radio receiver . . . . . . . . . . . . . . . 20
8.2 Connecting the IBT4N interface . . . . . . . . . . . . . . . . . . . . 20
8.3 Connecting the PS124 back-up battery . . . . . . . . . . . . . . 20
8.4 Connecting the Solemyo system . . . . . . . . . . . . . . . . . . . . 21
9 PRODUCT MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . 21
10 PRODUCT DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
11 TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . 22
12 CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
INSTRUCTIONS AND WARNINGS FOR THE USER . . . . . . 23

Nice MC424L Specifications

General

Brand	Nice
Model	MC424L
Category	Control Unit
Language	English