Chapter 3 Assembly
61
Chapter 3
Assembly
8
Connecting the power cord
WARNING
Be sure to use the specified power cord. Use of other power cords may result in malfunction or fire. This
product is classified as having Class I protection against electric shock. Make sure this product is connected
to an appropriate protective earth terminal.
Refer to Chapter 6, “2 Performance Properties” for the specified power cords.
To prevent electric shock, always turn off the power switch (press to the “O” position) for the microscope
before connecting or disconnecting the power cord.
(1) Check that the microscope power switch is OFF.
(2) Plug the power cord into the AC inlet at the back o
the microscope.
(3) Plug the other end of the power cord into a wall
outlet.
Assembly of the system configuration required for bright-field
microscopy is now completed.
ND4
ND8
UT
IN
DSC
Connecting the Power Cord
AC inlet
Power switch OFF
(press to “O” position)
To Next Page
Loading...
Need help?
General
