8260 User Guide version v. 0.06 [ 50 ] 4/21/00
Store touch tone sequences (strings)
You store touch tone strings the same way that you store names and
numbers in your phone book. You can store an entire digit sequence and
send it as touch tones for frequently used strings of numbers.
Store touch tone strings with phone numbers
1 Enter the phone number that you want associated with a touch tone.
2 Press
∗∗∗
(p) or
∗∗∗∗
(w).
w (wait): When you dial this phone number, your
phone first dials the number, then waits (because
of the w character) for you to press
Send. When
you press
Send, the phone sends your password.
p (pause): If you include a p character instead of a w, your phone
pauses for 2.5 seconds, then automatically sends your password as a
touch tone.
3 Enter the touch tone string.
4 Store the number as you normally would.
Send a touch tone string
1 Press Menu 4 > 2 > 3 > 1 (Settings > Phone settings > Touch tones
> Manual touch tones).
2 Make sure that the setting is not set to Off.
If it is, use or
to scroll to one of the other options and press
OK.
3 Then, during your call, press
Options, scroll to Touch tones and press
OK.
4 Enter the touch tone string or recall the string from the phone book,
and press
OK.
Warning: If you send touch tones while in the analog mode, be careful
not to send confidential information.
To Next Page
Loading...
Need help?
General
