8260 User Guide version v. 0.06 [ 58 ] 4/21/00
5 Scroll through your choices, which are listed and described in the
table below, and press
OK.
• Rename profiles
1 Press Menu 3 (Profiles).
2 Use or
to scroll to the desired profile and press Options.
3 Scroll to Rename and press
OK.
4 Enter the new name and press
OK again.
Note: You cannot rename the Normal, Headset, and Car kit
profiles.
• Restore factory settings
As was described in “Customize your phone” on page 51, you can change
the defaults that come with your phone. These defaults are known as
factory settings.
However, just as you can change some of these defaults, you can also
return them back to their original settings.
Note: The memory, timers, language selection, security code, and lock
codes are not reset. However, any profiles you have modified are
reset when you restore your settings.
1 Press
Menu 4 2 4 (Settings - Phone settings - Restore factory
settings)
2 Enter your security code and press
OK.
Automatic Instructs the phone to turn off the lights within 15
seconds if no keys are pressed.
On Instructs the phone to leave the lights on the entire time
that your phone is connected to the car kit.
To Next Page
Loading...
Need help?
General
