B710, B720, B730 User’s Guide > 74
When sending the PDF file to the printer using the lpr command,
printing will be done with the defaults set at the control panel,
including the defaults set for
Note
When the lpr command is used, you must specify the
number of copies using the lpr command. The [Quantity]
setting on the control panel will become disabled. If the
number of copies is not specified by the lpr command, it will
be treated as one copy.
Printing via Electronic Mail /
E-mail Printing
Models with the optional Hard Disk Drive or Compact Flash
installed can receive and print e-mails sent directly from your
computer via TCP/IP communication, including e-mail contents
and TIFF or PDF attachments.
This feature is known as E-mail Printing.
Environment Settings for E-mail Printing
To use the E-mail Printing feature, you need to configure server
settings (such as SMTP and POP3 servers) on your network
environment.
Note
Wrong e-mail environment settings may cause disruptions
in your network. Always ask your network administrator to
configure e-mail environment settings.
• Copies • Paper size
• Duplex • Paper feed
•Print mode
To Next Page
Loading...
Need help?
General
