Configuring the network settings > 13
4. Press the to select Wireless Setting, and then press the .
5. Press the to select Automatic setup (WPS), and then press the .
6. Press the to select WPS-PIN, and then press OK.
7. Press the to select Yes, and then press OK.
MEMO
> If Yes is selected in step 7, Implementing PIN method... is displayed in
the screen.
> If No is selected, the screen returns to that from step 6. Each time the
confirmation screen is displayed, the PIN code is automatically generated
and changed.
To Next Page
Loading...
Need help?
General
