Configuring the network settings > 27
C
ONFIGURING
YOUR
MACHINE
FOR
SCAN
TO
E-
MAIL
AND
INTERNET
FAX
Set up your machine for Scan To E-mail and Internet Fax using the information in the
"Setup Information Form," on page 9.
1. Press the SETTING button on the control panel.
2. Using the Down arrow key, scroll to Easy Setup and press OK.
3. Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight Enter and press OK.
4. Using the Down arrow key, scroll to E-mail Setting and then press the Right
arrow key.
5. Press the Right arrow key, then enter the SMTP server address (B-2) using the
arrow keys and on-screen keypad.
6. Highlight Enter and then press OK.
7. Press the Right arrow key, then enter the E-mail address for your machine (B-
1) using the arrow keys and on-screen keypad.
8. Highlight Enter and then press OK.
9. Select a protocol for the Receive Settings (B-4) by using the Up or Down arrow
keys and then press OK.
10. Select an authentication method (B-5) by using the Up or Down arrow keys and
then press OK.
11. Press the Right arrow key, then enter the SMTP user ID (B-6) using the arrow
keys and on-screen keypad.
12. Highlight Enter and then press OK.
13. Press the Right arrow key, then enter the SMTP password (B-7) using the arrow
keys and on-screen keypad.
14. Highlight
Enter and then press OK.
15
. Press the Right arrow key, then enter the POP-3 server address (B-3) using the
arrow keys and on-screen keypad.
16. Highlight Enter and then press OK.
17. Press the Right arrow key, then enter the POP-3 user ID (B-8) using the arrow
keys and on-screen keypad.
18. Highlight Enter and then press OK.
19. Press the Right arrow key, then enter the POP password (B-9) using the arrow
keys and on-screen keypad.
20. Highlight Enter and then press OK.
21. When the setup menu screen is displayed, press OK.
The setup for Scan To E-mail and Internet Fax is complete.
NOTE
The default password is “aaaaaa”.
To Next Page
Loading...
Need help?
General
