Oki mc series User Manual

User authentication and access control > 66
PIN AUTHENTICATION
R EGISTERING A PIN
Before enabling user authentication and access control, be sure to register a PIN for each
user. You must be the administrator to register PINs.
To register a PIN, launch PIN Manager from Configuration Tool.
E NABLING PIN AUTHENTICATION
You must be the logged on as the administrator to control access to the machine.
1. Press the SETTING button on the control panel.
2. Using the Down arrow key, scroll to Admin Setup and then press OK.
3. Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight Enter and press OK.
4. Using the Down arrow key, scroll to Management and press OK.
5. Using the Down arrow key, scroll to System Setup and press OK.
6. Make sure that Access Control is selected and press OK.
7. Using the arrow keys, scroll to PIN and press OK.
8. Press the BACK button to exit the menu.
NOTE
You can also register a PIN from the MFP web page.

Oki mc series Specifications

General

Brand	Oki
Model	mc series
Category	All in One Printer
Language	English