Oki mc series User Manual

Configuring the Scan to Computer and Remote Scan > 55
3. Enter the administrator password.
4. Select Enter and press OK.
5. Press the to select Scanner Setup and then press OK.
6. Press the to select WSD Scan Setup and then press OK.
7. Check that WSD Scan is selected, and then press OK.
8. Press the to select ON and then press OK.
9. Press the until the top screen appears.
S ELECTING THE D UAL -S IDE S CAN OF WSD S CAN FUNCTION
To enable the Dual-Side Scan of the Scan To Computer (WSD Scan) function and Remote
Scan (WSD Scan) function, follow the steps below.
1. Press the SETTING key.
2. Press the to select Admin Setup and then press OK.
3. Enter the administrator password.
4. Select Enter and press OK.
5. Press the to select Scanner Setup and then press OK.
6. Press the to select WSD Scan Setup and then press OK.
7. Press the to select Binding and then press OK.
8. Select Long Edge Bind or Short Edge Bind according to the scan document, and
press OK.
9. Press the until the top screen appears.
D ELETING A S CANNER D RIVER
You can delete scanner drivers.
For Windows
1. Click on Start, and then select Control Panel > Uninstall a program.
2. Select OKI MC5(3)x2/ES5(3)4x2 Scanner (for MC332dn, MC342dn, MC342dw, MC352dn,
MC362dn, MC362w, MC562dn, MC562w, MC562dw, ES3452 MFP, ES5462 MFP, ES5462dw MFP)
or OKI MPS2731mc Scanner (for MPS2731mc) and click on Uninstall.
If the User Account Control dialog box appears, click Yes.
3. If a confirmation message appears, click Yes.
4. Click Finish on the Uninstallation Complete screen.
For Mac OS X
1. From the hard disk, select Library > Image Capture > TWAIN Data Sources.
2. Depending on the method of connection of the machine, the following files will be
deleted.
NOTE
You must be logged on as an administrator to complete this procedure.

Oki mc series Specifications

General

Brand	Oki
Model	mc series
Category	All in One Printer
Language	English