Oki mc series User Manual

Appendix A - menu system > 146
Print Setup
(cont.)
EPSON FX
Setup
(cont.)
Line Length 80 Column,
136 Column
Specifies the number
of characters per line.
Form Length 11 inch, 11.7 inch,
12 inch
Specifies the length of
paper.
TOF Position 0.0 ~ 1.0 inch Specifies the distance
of print from the top
edge of the paper.
Left Margin 0.0 ~ 1.0 inch Specifies the distance
of print from the left
hand edge of the
paper.
Fit To Letter Enable, Disable Sets the printing mode
that can fit print data,
equivalent to 11
inches (66 lines), in
the LETTER-size
printable area.
Text He igh t Same, Diff Sets the height of a
character.
SAME: Regardless of
CPI, same height
DIFF: As CPI,
character heights vary.
Network
Menu
Network
Setup
Network
Setting
TCP/IP Enable, Disable Enables or disables
this network protocol.
IP Version IPv4, IPv4+IPv6 Set up the IP version.
Display condition:
TCP/IP protocol must
be enabled.
NetBEUI Enable, Disable Enables or disables
this network protocol.
NetBIOS Over
TCP
Enable, Disable Enables or disables
this network protocol.
Display condition:
TCP/IP protocol must
be enabled.
NetWare Enable, Disable Enables or disables
this network protocol.
EtherTalk Enable, Disable Enables or disables
this network protocol.
Frame Type Auto, 802.2, 802.3,
ETHERNET II, SNAP
Selects the Ethernet
MAC layer frame type.
Display condition:
Netware must be
enabled.
IP Address
Set
Auto, Manual Specifies whether IP
address allocation is
automatic (DHCP) or
manually assigned.
Display condition:
TCP/IP protocol must
be enabled.
ITEM OPTION VALUE/DESCRIPTION

Oki mc series Specifications

General

Brand	Oki
Model	mc series
Category	All in One Printer
Language	English