Configuring the network settings > 18
5. Press the to select Wireless Network Selection, and then press the .
6. The product starts to search the wireless access point.
7. A list of access points found by the search will be displayed. With the OK key, select
Manual Setup, which will be displayed at the very bottom.
8. Press the to select SSID, and then press the .
9.
Enter the SSID name (within 1-32 characters) of the wireless AP that you want to connect to.
After entering the SSID, move the cursor to the
Done
field and press
OK
.
MEMO
> When the OK button is pressed, the screen switches to the security settings
screen in step 5 without switching to the screen in step 6. If the SSID is not
set, a warning screen is displayed.
To Next Page
Loading...
Need help?
General
