Oki mc series User Manual

Advanced network settings > 98
(1) When WEP is selected:
a) When WEP is selected, WEP KEY is displayed.
Enter the same KEY as the WEP KEY set for the wireless AP that you want to
connect to.
(2) When WPA-PSK or WPA2-PSK is selected:
a) When WPA-PSK or WPA2-PSK is selected, Encryption type and Pre Shared
Key are displayed.
b) In Encryption type, select the encryption type (TKIP or AES) set in the wireless
AP that you want to connect to.
c) In Pre Shared Key, enter the same KEY as the Pre Shared KEY set for the
wireless AP that you want to connect to.
(3) When WPA-EAP or WPA2-EAP is selected:
a) When WPA-EAP or WPA2-EAP is selected, Encryption type is displayed.
MEMO
The default is "Disable".
NOTE
There is not setting for the WEP KEY index. The WEP KEY index
communications with the wireless AP as 1.
MEMO
After entering the KEY, the key is displayed as "*" symbols for security reasons.
MEMO
The default is "TKIP".
Depending on the model of wireless AP, the mixed TKIP/AES may be
supported. In this case, we recommend using AES.
MEMO
After entering the KEY, the key is displayed as "*" symbols for security reasons .

Oki mc series Specifications

General

Brand	Oki
Model	mc series
Category	All in One Printer
Language	English