Oki ML280 Elite User Manual

GETTING STARTED > 11
I
NSTALLING
/R
EPLACING THE
R
IBBON
C
ARTRIDGE
RIBBON CARTRIDGE HANDLING
l Leave unused ribbon cartridges in their packages until
needed.
l Careful; the ribbon ink may cause permanent stains.
l Ribbon ink on skin or clothing can usually be removed with
soap and water.
Make sure the printer is turned OFF.
1. Open the access cover and center the printhead (1).
CAUTION!
When replacing a Ribbon Cartridge, make sure you have the correct
replacement ribbon for your printer. The wrong ribbon will not print
when installed in your printer.

Oki ML280 Elite Specifications

General

Color	No
Character pitch	10, 12, 15, 17.1, 20 cpi
Maximum resolution	240 x 216 DPI
Typestyles supported	Double height, Double width, Emphasised, Enhanced, Italics, Overscore, Underline
Maximum number of copies	3 copies
Maximum print speed (draft)	240 cps
Maximum printing width (columns)	160
Mean time between failures (MTBF)	20000 h
Product color	Gray
Sound pressure level (printing)	58 dB
Sound pressure level (quiet mode)	51 dB
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Serial (RS-232), Serial (RS-422)
AC input voltage	220 - 240 V
Voltage tolerance	10 %
AC input frequency	50 - 60 Hz
Power consumption (typical)	60 W

Weight and Dimensions

Depth	275 mm
Width	372 mm
Height	80 mm