Oki ML280 Elite User Manual

SETTING UP YOUR PRINTER > 20
BOTTOM FEED CONTINUOUS FORM FAN-FOLD PAPER
Ensure that the printer is switched OFF and the power supply lead
removed.
1. Place the printer on a slotted printer stand, carefully aligning
the slot in the stand with the slot in the base of the printer.
2. Place a box of fan-fold paper under the printer stand.
3. Remove the Access cover.
4. Move the Bail arm lever (2) (on the left-hand side of the
printer) to the front of the machine to lift the Bail bar.
5. Move the Paper lever (3) (on the right-hand side of the printer)
to the front of the machine, to the fan-fold symbol.
6. Insert the first sheet of paper through the opening in the
printer stand and the bottom of the printer.
7. Adjust the Platen sprocket(s) to align with the sprocket holes
in the paper.
8. Use the Platen knob to gently pull the paper up until it appears
in front of the platen, and above the Bail bar
9. Move the Bail arm lever to the rear of the machine to lower the
Bail bar (6).
10. Use the Platen knob (5) to advance the paper to the first
printing line.
11. Replace the Access cover and switch the printer ON.

Oki ML280 Elite Specifications

General

Color	No
Character pitch	10, 12, 15, 17.1, 20 cpi
Maximum resolution	240 x 216 DPI
Typestyles supported	Double height, Double width, Emphasised, Enhanced, Italics, Overscore, Underline
Maximum number of copies	3 copies
Maximum print speed (draft)	240 cps
Maximum printing width (columns)	160
Mean time between failures (MTBF)	20000 h
Product color	Gray
Sound pressure level (printing)	58 dB
Sound pressure level (quiet mode)	51 dB
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Serial (RS-232), Serial (RS-422)
AC input voltage	220 - 240 V
Voltage tolerance	10 %
AC input frequency	50 - 60 Hz
Power consumption (typical)	60 W

Weight and Dimensions

Depth	275 mm
Width	372 mm
Height	80 mm