Getting started > 11
I
NSTALLING
THE
RIBBON
CARTRIDGE
R
IBBON
CARTRIDGE
HANDLING
> Leave unused ribbon cartridges in their packages until needed.
> Careful; the ribbon ink may cause permanent stains.
> Ribbon ink on skin or clothing can usually be removed with soap and water.
Make sure the printer is turned OFF.
1. Open the access cover and center the printhead (1).
2. Unpack the new ribbon cartridge and install it on the printhead.
CAUTION!
Make sure you have the correct replacement ribbon for your
printer. The wrong ribbon will not print when installed in your
printer.
WARNING!
The printhead may be HOT.
CAUTION!
Do not remove the ribbon shield (1) from the ribbon.
1
To Next Page
Loading...
Need help?
General
