Using your printer > 35
M
ANUAL
FORMS
TEAR
-
OFF
If you don’t wish to engage the Forms Tear-Off feature, you can advance:
> rear-feed continuous forms loaded on the built-in tractor
or
> bottom-feed continuous forms loaded on the optional push tractor
up to the tear-off position manually, by pressing TEAR (5).
P
APER
PARK
Paper park allows you to switch to single sheet printing without removing continuous feed
paper from the printer.
When you wish to print single sheets, simply press PARK (6) to retract the continuous form
paper from the paper path, then lift the sheet guide, load the sheet and send the print job.
C
HANGING
PAPER
PATHS
C
ONTINUOUS
FORMS
TO
SINGLE
SHEETS
1. Tear off any printed pages, then press PARK.
2. Raise the sheet guide (1) to the single sheet feed position.
3. Pivot the wire feed guide into the sheet guide.
CAUTION!
Never park labels.
1