139
EN
Menu functions (Shooting menu)
4
Recording multiple exposures in a single image
(Multiple Exposure)
Take two shots and combine them into a single picture. Alternatively, you can take a
shot and combine it with an existing picture stored on the memory card.
The combined image is recorded at current image quality settings. Only RAW pictures
can be selected for multiple exposures that include an existing image.
If you record a multiple exposure with RAW selected for [KK], you can then select
it for subsequent multiple exposures using [Overlay], allowing you to create multiple
exposures combining three or more photographs.
• This option is available in P, A, S, M, and
B
modes.
1
Select [Multiple Exposure] in X Shooting Menu 2 and press the Q button.
2
Use FG to select the item and press I.
• Use FG to select the setting and press the Q button.
Multiple Exposure
Number of Frames Off
Auto Gain Off
Overlay Off
Back Set
Number of
Frames
[Off]: Do not create additional multiple exposures.
[2f]: Create a multiple exposure from 2 pictures.
Auto Gain
[On]: Halve the brightness of each picture in the multiple exposure.
[Off]: Do not adjust brightness the brightness of the pictures in the
multiple exposure.
Overlay
[On]: Shoot a multiple exposure that includes an existing RAW image
stored on the memory card.
[Off]: Create a multiple exposure from the next 2 pictures taken.
• [Overlay] is only available when [2f] is selected for [Number of
Frames].
3
If [On] is selected for [Overlay], you will be
prompted to choose a picture for the multiple
exposure.
• Highlight a picture using the arrow pad (FGHI) and
press the Q button.
• Only RAW images can be selected.
Overlay
RAW RAW RAW
RAW
RAW RAW RAW
Back Set
4
Press the Q button in the multiple exposure menu to save the selected
settings.
• The shooting menu will be displayed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
