169
EN
Menu functions (Custom menus)
4
T Exp/ISO/BULB/p
Option Description
g
Exposure Shift Adjust correct exposure separately for each metering mode.
• This reduces the number of exposure compensation
options available in the selected direction.
• The effects are not visible in the monitor. To make
normal adjustments to the exposure, perform exposure
compensation (P. 64).
—
EV Step Choose the size of the increments used when selecting
shutter speed, aperture, exposure compensation, and other
exposure parameters.
—
ISO Step Select the increments available for choosing ISO sensitivity. —
ISO-Auto Set [Upper Limit/Default]: Choose the maximum and default ISO
sensitivity used when [AUTO] is selected for ISO. Select
[Upper Limit] to choose the maximum sensitivity, [Default] to
choose the default sensitivity. The maximum is 6400.
[Lowest S/S Setting]: Choose the shutter speed at which the
camera starts raising ISO sensitivity automatically in modes
P and A. Choose [Auto] to let the camera choose a shutter
speed automatically.
—
ISO-Auto Choose the shooting modes in which [AUTO] ISO sensitivity
is available.
[P/A/S]: Auto ISO sensitivity selection is available in all
modes except M.
[All]: Auto ISO sensitivity selection is available in all modes.
—
K Noise Filter
Choose the amount of noise reduction performed at high
ISO sensitivities.
—
Noise Reduct. This function reduces the noise that is generated during
long exposures.
[Auto]: Noise reduction is performed at slow shutter speeds,
or when the internal temperature of the camera has risen.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
• The time required for noise reduction is shown in the
display.
• [Off] is selected automatically during sequential shooting.
• This function may not work effectively with some shooting
conditions or subjects.
—
MENU
G T